Description
Looking for a fiber optic connection solution?
This optical cable provides a solution for the connection between your communication box and the wall socket. A connector that fits the socket to make the upstream/downstream connection. It is a SC/APC – SC/UPC universe cable for all scenarios at home or in your office (for the Freebox).
Specific design in mind.
Return loss refers to the ratio in decibels of the ratio of backward reflected light (scattered light transmitted continuously at the input end) to input light at the fiber connection.
The end face is ground at an 8 degree angle to further reduce return loss.
Thanks to the specific design, the head return loss is less than -60dB, of which the insertion loss is also very reliable (≤0.2dB)
Specific design in mind.
Return loss refers to the ratio in decibels of the ratio of backward reflected light (scattered light transmitted continuously at the input end) to input light at the fiber connection.
The end face is ground at an 8 degree angle for the SC/APC bit.
Thanks to the specific design, the head return loss is less than -60dB, of which the insertion loss is also very reliable (≤0.2dB)
Soft Peel and LSZH sheathing
Your optical fiber is protected by LSZH materials. they are insulated with polyethylene, PVC or polyurethane. During a fire, chlorinated plastic releases hydrogen chloride, a toxic gas that forms hydrochloric acid when it comes into contact with water. Halogen-free cables do not produce dangerous gas or acid combinations or toxic smoke when exposed to flame. Inside, we added a polymer coating with a thickness of 25 μm. The coating layer not only effectively isolates moisture or corrosive liquid, but also has the greatest effect of improving the strength of the optical fiber, and the performance of bending strength, tensile strength and toughness to pressure are greatly improved.
Bending and the solution for corners
We did a bending test to make sure the protection can work well in some undesirable scenarios.
The minimum radius diameter in the corners is 5mm (generally 10mm -20mm) and the Dynamic Fatigue Parameter (Nd) reaches 26 (20 for general fiber)
Reusable ribbon and packaging
We use reusable tape and reusable packaging for good protection and delivery to you.
cecile -
This bend-insensitive optical jumper makes installation easier and saves more space for our data center, we are happy with it.
bernd30 -
Hello,
In fact when passing the fiber through a 5 m long sheath, there was a little mechanical resistance, and by pulling a little harder, this damaged the fiber (there was nothing apparent, but when testing it with a laser, there was no more signal).
I installed a new one (from another brand) but then put talcum powder and everything went well. We now have the box in the living room…
I can't say if the problem comes from a fragility of the fiber or if the effort was too great (it was my helper who pulled), which is why I'm giving it 4 stars.
cordially