Fibre preparation • Aramid • Stripping 250 / 900 µm

Kevlar Scissors & Stripping Pliers

Preparing a fibre takes three moves: open the jacket, cut the aramid (Kevlar) and strip the coating. Ordinary scissors go blunt on aramid within a few cuts — hence a dedicated tool for each step.

Choose my tool The three moves Products
Kevlar scissors and fibre optic stripping pliers ELFCAM
Contents
ChooseThe movesBenefitsProducts

Choose my preparation tool in 30 seconds

Answer 2 short questions — we show you the tool for the job you need to do.

Step 1 What do you need to do?
Step 2 Single tool or kit? (optional)

The three moves of fibre preparation

Each move has its tool. Mixing them up damages the fibre or the tool — usually both.

1 · Open the jacket

Split the outer jacket without nicking the fibres. Stripping pliers with several calibrated notches set the depth for the operator.

2 · Cut the aramid

Reinforcing Kevlar will not cut with ordinary scissors: it wears them out in a few passes. Scissors with treated serrated blades are made for it.

3 · Strip the coating

Remove the 250 µm acrylate or the 900 µm jacket to expose the bare fibre, without micro-cracks — that is what breaks later in the splicer.

Special case: ribbon fibre

On ribbon you do not scrape: you heat. The thermal stripper softens the coating and removes it in one piece.

Why choose our preparation tools?

Blades treated for aramid

Serrated and hardened: they keep their bite where office scissors start slipping after a few cuts.

Calibrated notches

The 3-in-1 and 4-in-1 pliers bring jacket, 900 µm and 250 µm together in one tool, each notch at its own depth.

Single tool or complete kit

A spare for the toolbox, or a scissors + pliers kit to equip a workstation in one go.

Copper too

RG 59/6/7/11 coaxial stripper and RJ45 crimping pliers for mixed fibre and copper jobs.

Our preparation tools

See also

High-precision cleavers

The next step: cleaving the bare fibre before splicing.

Optical cleaning

Pens and cassettes to clean end faces after handling.

All fibre tools

Splicers, measurement, pulling and inspection microscopes.

EN / EUR France FR / En
Select the country/region, the language, and the currency in which you want to shop.
Deliver to
France
Select your shipping address to estimate shipping fees and delivery time.
FR36844111856 FR72942871351 ES00284989993 ITN0078120C DE340181882 GB367772843
ELFCAM

All products

Loading catalogue…
My Cart
⚑
Chargement...
We accept
PaymentPaymentPaymentPaymentPaymentPaymentPaymentPaymentPayment
Security certification
SecuritySecuritySecuritySecuritySecuritySecuritySecurity
©2018 - 2026 ELFCAM FR All rights reserved. v10.11.25 Cookie preferences
View cart Proceed to checkout